


Part of a solution
We supply the product on its own or as part of a bespoke wine cellar, including design and installation.
Bespoke wine cellarsThrough-wall · Wine Master
Wine Master C25X wine cellar cooling unit
A compact through-wall cooling unit for wine cellars of up to 25 m³. It cools the cellar and exhausts warm air into an adjacent ventilated room or outside.
Versions
- C25 X – cooling
- C25 SX – cooling and heating
- C25 SRX – heating and compressor heating
- OutdoorsCZK 106,536
- IndoorsCZK 79,934
- With heatingCZK 94,695
Technical specifications
Specifications
- Cooled space (max.)
- 25 m3 with insulation to the manufacturer’s specification
- Installation type
- through-wall
- Cooling capacity
- 550 W at 15 °C
- Power consumption
- 400 W
- Temperature setting
- 8–18 °C (factory setting 12 °C)
- Max. temperature in the heat exhaust space
- 35 °C
- Noise level
- 45 dB (1 m) / 40 dB (3 m)
- Dimensions (W × H × D)
- 54 × 38 × 52.4 cm
- Weight
- 27 kg
- Refrigerant
- R290
- Power supply
- 230–240 V, 50 Hz, 3 m cable
- Warranty
- 2 years
Specifications based on the manufacturer’s documentation.
Description
About the product
The Wine C25 X is installed in an opening in the wall between the cellar and an adjacent space. It cools on the cellar side and exhausts warm air on the other – approximately 15 °C warmer than the air it draws in. The space behind the wall must therefore be ventilated: ideally around 20 °C, max. 35 °C for short periods. If warm air is not suitable for the adjacent room, a ducted or split solution is more appropriate.
Versions according to the manufacturer:
- C25 X – cooling only
- C25 SX – cooling and heating (250 W heating element) for cellars where the temperature drops in winter
- C25 SRX – additionally with compressor heating for cold conditions on the heat exhaust side
Factory setting 12 °C, range 8–18 °C. Installed in a wooden mounting frame; condensate drains through a hose. The dust filter is changed as needed, at least once a year. The unit requires a dedicated circuit breaker of at least 16 A.
According to the manufacturer, the maximum volume applies only to a space insulated according to the table in the manual (all walls, ceiling, floor and door). Glazing, adjacent heated rooms and frequent door opening increase the capacity required – so we choose a suitable unit for the specific space.
The cooling unit cools and stabilises temperature; it does not control humidity on its own. Stable humidity comes mainly from the insulation and airtightness of the space; for humidifying or dehumidifying, the manufacturer offers separate devices.
More products
Through-wall
- Wine Master C50X wine cellar cooling unit
from CZK 113,724 incl. VAT
- Wine Master Wine PC15 in-door wine cellar cooling unit
CZK 141,495 incl. VAT
- Whole category →Through-wall
Advice
Need help choosing?
We choose cooling capacity and racking type according to the volume and insulation of the room. Send us the dimensions of the space and we will propose a suitable solution.

